A feeder container ship with two deck cranes moored at a regional terminal

A used feeder has passed your initial route screen. The broker’s particulars list 1,050 nominal TEU, 720 TEU at 14 tonnes, two cargo cranes and 100 reefer outlets. Before arranging a survey, ask the seller for the records behind those figures and check that the records describe the ship as she is configured today. The figures here are illustrative.

Use the feeder route-fit checklist to establish the operating requirements first. Bring those requirements into the seller request so the reply can identify which drawings, records or restrictions apply.

Ask the seller to identify the basis of each figure

Container intake. Ask which revision of the container arrangement or capacity plan supports the nominal slot count. For the stated 14-tonne homogeneous intake, ask for the supporting loading case, its assumed gross container weight, draught and consumables, and the limits that controlled the result. If the plan and particulars give different figures, ask for the current figure, the reason for the difference and the supporting document. Include the relevant pages of the current Cargo Securing Manual for the proposed positions.

Cargo cranes. For a geared ship, request the current register, certificates and load charts for each crane, identified by equipment number. Ask the seller to identify the safe working load at the outreach you expect to use and list any operating restrictions or unavailable equipment. If your service depends on shore gear, record that assumption in the request.

Reefer supply. Ask what the outlet count represents on the date of the offer. Request the layout, a dated list of outlets unavailable for service and the electrical load information that supports simultaneous reefer operation alongside the ship’s other loads. Ask for the conditions behind the stated capacity, including the generator configuration.

Turn the reply into a survey brief

Suppose the seller supplies a dated capacity plan and a loading case supporting the two TEU figures, plus current charts for both cranes. The reefer layout shows 100 installed outlets, the seller lists eight as unavailable, and the load assessment supports 70 simultaneous reefers under the documented operating conditions. Record all three figures alongside their sources: 100 installed, 92 reported available and evidence for 70 in simultaneous service.

If the route screen called for 80 reefers at once, mark reefer supply as open. Ask the seller or technical team for a load assessment covering the proposed 80 units and their distribution. Treat that reply as a decision point before booking the survey if the capacity is essential to the purchase. Once the documentary issue is resolved, give the surveyor the relevant drawing revisions, the unavailable outlet list and the points to verify on board. See the container ship cargo-system inspection guide for the onboard checks.

Copy this email to request documents from the seller

Subject — Pre-survey documents for [vessel name / IMO number]

Hello [name],

We are reviewing [vessel name / IMO number] for [intended service]. Our initial requirements are [container mix and gross weights], [arrival draught limit], [crane duty and outreach, if applicable] and [number of reefers requiring simultaneous power]. Please reply against each item below with the document title, date or revision, and the relevant page or drawing number.

  1. Vessel particulars. Please send the current particulars and identify any equipment or capacity changes since they were issued.
  2. Container intake. Please send the current container arrangement or capacity plan, the basis and assumptions for the quoted homogeneous intake, and the relevant Cargo Securing Manual pages. Please explain any differences between the particulars and the current records.
  3. Cargo cranes, if fitted. Please send the lifting-appliance register, current certificates and load charts by crane ID. Please state the safe working load at [required outreach] and list current restrictions or unavailable cranes.
  4. Reefer supply. Please send the outlet layout, dated list of unavailable outlets, and the electrical load assessment showing the supported simultaneous reefer load and its operating assumptions.
  5. Open items and access. Please identify missing or superseded records, confirm when replacements can be supplied, and tell us which cargo areas and equipment can be made available for inspection.

Please flag any document that requires an NDA and who can release it. A marked-up scan or an extract with its revision and page number is welcome for the initial review.

Thank you,
[name / company]

If you are reviewing a ship from our feeder container ship listings, include the vessel reference and operating requirements in your enquiry so we can identify the relevant documents.

Golden Shipyard — sale & purchase

Buying, or want a second opinion?

Our sale & purchase desk can help you find, value and inspect the right tonnage. Tell us what you’re looking for and we’ll revert within one working day.